Purpose
All SG Connect fixtures can be added to a group using a list overview.
How to add luminaires
→ Open the group, tap “+” and select “Lights” to start discovering all
the lights that are in close reach for commissioning. Please wait 10 seconds.
→ If not selected already, click on the “Discovered” tab. A list of all the lights
with wireless component sorted by signal strength is shown.
→ To identify a luminaire in the app, click on the device name: the corresponding
luminaire will blink several times.
→ Press “Add” for all those lights that need to be added to the group. When multiple
devices are added simultaneously, a loading bar pops up. Press “Finish adding” to finalize.
Step-by-step guide
Step 1
Open the group, tap “+”
Step 2
Select “Lights” to start discovering all the lights that are in close reach for commissioning. Please wait 10 seconds.
Step 3
Select “Lights” to start discovering all the lights that are in close reach for commissioning. Please wait 10 seconds.
Step 4
Select “Lights” to start discovering all the lights that are in close reach for commissioning. Please wait 10 seconds.
Step 5
If not selected already, click on the “Discovered” tab.
Step 6
A list of all the lights with wireless component sorted by signal strength is shown. To identify a luminaire in the app, click on the device name: the corresponding luminaire will blink several times.
Step 7
Press “Add” for all those lights that need to be added to the group.
Step 8
When multiple devices are added simultaneously, a loading bar pops up. Press “Finish adding” to finalize.
Step 9
Press “Finish adding” to finalize.
Step 10
Press “Finish adding” to finalize.
